poe repeater over 2-wire (master) POT-0100 the pot system, one master & one slave units, provide a long-reach ethernet extension with remote power- over-ethernet (poe) capability over a 2-wire line. connection with a class 0 pd device, the distance of two-wire 24awg cables can be up to 400 meters when using a 48watt high power poe switch, fsw-0513/0543. users may select a fxed data rate for diferent copper line ranging. the maximum data rate can be up to 60 mbps full duplex for 2-wire line. the pot master unit is powered by the local poe ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. the remote unit regenerates the power and provides the poe capability to power up the remote pd device up to 15 watts when connecting to 48watt high power switch, fsw-0513. the pot m/s supports the indoor & outdoor models with wall-mount feature. equipped with dip switches, the 2-wire line speed can be confgured to meet diferent line gauges and distances. a pot pair ofers a cost efective solution for remote power applications such as lan-to-lan connectivity, video streaming, fttb, and mdu/mtu over single twisted line. key features - two-wire cables are used to connect 100mbps fast ethernet poe devices - maximum distance up to 500 meters for 24 awg cable - maximum data rate up to 60mbps full duplex - remote poe capability for pd devices of wifi ap, ip camera, ip telephones - up to 15 watts for remote poe, depending on pse power - easy installation by indoor & outdoor diferent models - dip switches for 2-wire line rate settings - auto mdix for 10/100 base-tx ethernet lan ports - low-latency for video/voice/data applications works well with h/w version: 1 1 1. led indicator 2. dip switch 3. rj-11 out 4. rj-45 in 2 3 4 poi-4000 high-power poe injector fsw-0513 4-port high power poe switch
www.level1.com i one world_one brand_one level_ ethernet switches technical specifcations line interface data rate: 60/60 mbps power: 48v rj-11 connector x 1 lan interface auto-detection for 10/100 base-tx and half / full duplex full compatible with ieee 802.3 / ieee802.3u automatic mdix function rj-45 connector x 1 pse output voltage within 44~57v safety-extra-low-voltage (selv) compliant maximum output power 15 watts led indicator: power: green on- indicates power is on and normal lan: green on- indicates ethernet lan port is in connection flashing- indicates ethernet lan data activates line: green on- indicates 2-wire line is in connection flashing- indicates 2-wire line is in line handshaking m/s: green on-indicates as 2-wire slave unit green of- indicates as 2-wire master unit physical dimension ( l x w x h ): 120mm x 90mm x 28mm operating environment: humidity: 5% ~95% non-condensing temperature: 0~50c regulatory compliance: fcc rules part 15 ce product diagram order information POT-0100: poe repeater over 2-wire (master) package contents POT-0100 x 1, user manual x 1 all mentioned brand names are registered trademarks and property of their owners. technical specifcations are subject to change without notice. ? copyright digital data communications gmbh. all rights reserved. v1.0 note: these distances are typical results when used with 24awg rj-11 cable non-poe switch fsw-0513 POT-0100 1m 48w pot-0110 100m poe pd devices ethernet cable (rj-45) poe (power + data) rj-11 phone line (power + data) up to 400m for 2 wire indoor to indoor solution non-poe switch poi-4000 POT-0100 1m 40w pot-0110 100m poe pd devices up to 300m for 2 wire indoor to indoor solution
|
